Sourcetronic ST2826, Руководство по эксплуатации

Страница: 21 / 145

ST2826 Operation manual Ver1.0
◇
11
3.1.1Measure
In ST2826, two parameters of impedance component can be tested meanwhile
：
Primary
parameter and secondary parameter. The parameter is as below
：
Primary parameter

|Z| (Module of impedance)

|Y| (Module of admittance)

L (Inductance)

C (Capacitance)
 R (Resistance)

G (Conductance)
 DCR (DC resistance)
Secondary parameter

D (Dissipation factor)
 Q (Quality factor)

Rs (Equivalent series resistance)
 Rp (Equivalent parallel resistance)

X (Reactance)

B (Admittance)

Ө
(Phase angle)
The test result of primary parameter and secondary parameter can be displayed with two lines
of large character. The primary parameter is displayed on the first line
，
and secondary
parameter is displayed on the second line.
Operation step of measure setting
：
1) Move cursor to Function zone. The following softkeys are displayed
。
 Cp-D

Cp-Q

Cp-G
 Cp-Rp

More 1/7
2) Select and press a softkey to set measure function. If the softkey you require is not
displayed on the page, press More 1/7 to display the following softkeys.

Cs-D
 Cs-Q

Cs-Rs
 More 2/7
3) Select and press a softkey to set measure function. If the softkey you require is not
displayed on the page, press More 2/7 to display the following softkeys.