Source WXP LP, Инструкция по уходу и эксплуатации

Страница: 15 / 31

16
Care: Cleaning the Reservoir
It is recommended to wash the reservoir if it was filed
with liquids other than water (such as sweetened
beverages) or before prolonged storing.
To clean the reservoir:
1. Disconnect the tube: push the release button of the
QMT connector. (drawing 12). OR: If your system is
not equipped with QMT connector, firmly pull and
twist it away from its connector (drawing 13).
2. Slide off Widepac™ closure for wide opening access.
(drawing 1)
3. Wash reservoir with soapy water (drawing 14).
If necessary scrub with a soft brush. Rinse well.
CAUTION Never use boiling water.
Do not scrub reservoir with
abrasive materials.
4. Dry reservoir completely as detailed in page 14:
(drawing 10), slide the wideslide back (drawing 11).
5. Reconnect the tube and store the system in a dry
place.
6. If necessary, proceed to clean the tube and valve:
• page 13: HELIX™ valve
• page 15: STORM™ valve