6
Filling the reservoir
FIRST USE: Before drinking it is strongly recommended
to rinse the reservoir with water and drain it through
the tube and valve. Follow the instructions for filling
and operating the valve
BUT DON'T DRINK YET.
Before drinking you will be instructed how to drain the
water you filled in the resrevoir.
1. To fill: Open Filler-Cap.
2. Grasp integrated Refill-Handle and fill reservoir
(drawing 1).
The reservoir is designed to store cold as well as
warm drinks (up to 60ºC or 140ºF). You may add ice
for cold drinks, or even freeze water in the reservoir
overnight (only 3/4 full).
3. Close Filler-Cap and tighten for airtight seal.
4. In our integrated hydration systems, the reservoir
is stored inside the pack. Filling in these models is
done without taking the reservoir out of the pack:
just open the Filler-Cap, grasp the handle as shown
in drawing 2 and fill.
CAUTION
Do not fill with boiling water.
NOTE
Turn pack upside down and suck out
excess air from the reservoir to silence
your pack (stealth mode) and increase
the period for which water remains
fresh and taste-free.
Содержание WXP LP
