manualshive.com logo in svg

SoundCraft DC 2020, Руководство пользователя


Поделиться
Скачать
background image

overwritten with new ones.

The Monitor faders will only follow the Control Group faders when the Monitor
faders are in Read, Write or Armed mode. If the Monitor faders are switched into
Manual mode, and the Control Group fader is moved, and then the Monitor faders
are switched into one of the three active modes they will immediately move to their
new positions: i.e. switching them into Manual Mode does not change the offset
between them and the Control Group’s fader position.

The use of the Control Group faders is best explained by use of the examples given
below.

•

Example 1

Suppose that a Mono Input fader is at 0dB at the time that it is assigned to a
Control Group. The Control Group’s fader is also at 0dB. If the Control Group’s
fader is moved then the Monitor fader will follow it (provided it is not in Manual
mode).

•

Example 2

Suppose now that you put the Control Group’s fader back to the 0dB position.
Suppose also that the Mono Input Monitor fader is in Write or Armed mode and
that you move it individually to, say, -10dB. If you then move the Control
Group’s fader the Monitor fader will follow it but with a -10dB offset.

Note what happens when the Control Group’s fader is moved to -

∞

: the Monitor

fader also goes to -

∞

, but when the Control Group’s fader is moved back up

again the -10dB offset is still in operation.

•

Example 3

Suppose again that you put the Control Group’s fader back to the 0dB position.
Also suppose that the Mono Input Monitor fader is in Write or Armed mode and
that you move it individually to, say, +10dB. If you then move the Control
Group’s fader the Monitor fader will follow it but with a +10dB offset.

Again note what happens when the Control Group’s fader is moved to -

∞

: the

Monitor fader also goes to -

∞

, but when the Control Group’s fader is moved

back up again the +10dB offset is still in operation.

Also notice what happens as the Control Group’s fader moves towards the
+10dB mark (top of its travel): the Monitor will already have reached the top,
but when the Control Group’s fader is moved back down again the +10dB offset
is still in operation.

•

Example 4

In this final example suppose that the Control Group’s fader is at, or near, -

∞

. A

Monitor fader is at, say -10dB. A small movement of the Control Group’s fader will
cause large movements on the Monitor fader in question. You will notice from this
that you will not have very fine control when a large offset exists. To regain this fine
control you may use the Fader Disengage facility described in the next paragraph.

Fader Disengage

If you have run out of fader travel, or you no longer have fine control as described
in example 4 above, you may temporarily disengage the Control Group faders as
follows: press and hold the SEL button on the appropriate Control Group panel, and
move the fader to a new position, then release the SEL button. 

DC2020 Automated Mixing

4.121

Содержание DC 2020































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DC 2020

Oster FPSTHM2578 User Manual preview
FPSTHM2578
Бренд: Oster Страницы: 9
Oster MGSTSL7500-449 Instruction Manual preview
MGSTSL7500-449
Бренд: Oster Страницы: 20
Amersham Pharmacia Biotech M-925 Instructions Manual preview
M-925
Бренд: Amersham Pharmacia Biotech Страницы: 8
VADO ethos Installation & Maintenance Instructions preview
ethos
Бренд: VADO Страницы: 4
Nady Audio PMX 1200 Operating Instructions Manual preview
PMX 1200
Бренд: Nady Audio Страницы: 10
Kambrook KHM655 Instruction Booklet preview
KHM655
Бренд: Kambrook Страницы: 16
Rolls RM75 MixMate II Owner'S Manual preview
RM75 MixMate II
Бренд: Rolls Страницы: 4
SPACE POST ELECTRONICS FUZZ I User Manual preview
FUZZ I
Бренд: SPACE POST ELECTRONICS Страницы: 5
Biamp AudiaFLEX Manual preview
AudiaFLEX
Бренд: Biamp Страницы: 3
ALLEN & HEATH ZED 22FX Service Manual preview
ZED 22FX
Бренд: ALLEN & HEATH Страницы: 11
Morphy Richards Kitchen machine with attachments Instructions Manual preview
Kitchen machine with attachments
Бренд: Morphy Richards Страницы: 9
Kasanova SL-KE05 Instruction Manual preview
SL-KE05
Бренд: Kasanova Страницы: 24
LD LAX6 User Manual preview
LAX6
Бренд: LD Страницы: 110
Vein-Tap Dark Waves Tap Tempo Tremolo v2.0 Instruction Manual preview
Dark Waves Tap Tempo Tremolo v2.0
Бренд: Vein-Tap Страницы: 14
Effectrode Delta-Trem Owner'S Manual preview
Delta-Trem
Бренд: Effectrode Страницы: 4
AEG HM 190 Instructions For Use preview
HM 190
Бренд: AEG Страницы: 5
Boston Acoustics BA X8 User Manual preview
BA X8
Бренд: Boston Acoustics Страницы: 18
API 3124mb+ Operator'S Manual preview
3124mb+
Бренд: API Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды