SoundCraft DC 2020, Руководство пользователя

Страница: 135 / 190

Remap Console
The Remap Console page appears as follows:
This facility allows you to swap the stored mix movements for one input with that
of another input. This would be useful if, for example, an input strip failed during
a Mix session. You could swap the affected input with an unused input (and swap
the leads to the tape machine etc).
Touch Pads
Individual, Numbered pads. To swap two inputs with each other you press one of
their numbers, followed by the other one. The numbers in the two pads in question
will swap over.
It may be helpful to think of the pad itself as representing the physical input strip,
and the number in it as representing stored moves in the Mix.
Reset Mappings. This resets everything back to the default values as shown in the
diagram above.
OK. Pressing this implements any changes and returns you to the Mix page.
Cancel. Pressing this returns you to the Mix page without implementing any
changes.
1 2 3 4 6 7 8 9 10
12 14 15 16 17 18 20
21 22 23
33
24
34
25
35
26
36
28
38
29
39
30
40 31 32
5
27
37
11 13 19
Reset
mappings
Cancel OK
Remap Console
DC2020 The Automation Pages 4.95