SoundCraft DC 2020, Руководство пользователя

Страница: 111 / 190

Group Assignments
The Group Assignments page is accessed by pressing the Group Assign button on
the Automation panel. It appears as follows:
This page shows which Control Group, if any, each Input is assigned to.
To assign Input Channels to Control Groups proceed as follows:
•
Press the GROUP ASSIGN button on the Automation Panel, the green LED will
glow to indicate that the mode is active, and the Group Assign page will be
displayed on the screen.
•
Press the appropriate Select Group touch-pad for the particular Control Group
you wish to assign Mono Inputs to. The touch-pad in question will then be
displayed in reverse video to indicate that this is the currently selected Group.
•
Press the SEL switch on the Inputs you wish to assign. The appropriate Control
Group Assign LED on the Mono Input will glow. In addition the small square
on the screen which represents the Monitor will be displayed in reverse video.
Touch-pads
Select Group 1 /2 /3 /4. Pressing these allows you to assign individial Inputs to
Control Groups. Press the SEL switch on an Input to assign it to the
currently-selected Group.
Clear Group 1 /2 /3 /4. Pressing these removes all of the assigned channels from the
Group in question.
Note: The Group Assignments are stored against each Title: they will, therefore, be
reassigned every time a different Title is selected.
The Group Assignments are not put into effect until you exit from this page. This
is done by pressing the Group Assign button again.
Clear
Group 1
Select
Group 2
Clear
Group 2
Select
Group 3
Clear
Group 3
Select
Group 4
Clear
Group 4
Group Assignments
1
21
31
2
22
32
3
23
33
13
4
24
34
14
5
25
35
15
6
26
36
16
27
47
17
28
38
18
9
29
39
19
10
30
40
20
7 8
Select
Group 1
11 12
DC2020 The Automation Pages 4.71