
19
In Manual mode the individual relay outputs and the connected consumers can be che-
cked for proper functioning and correct assignment.
Function in manual mode:
The relays and thus the connected consumer are switched on and off by pressing a key,
with no regard to the current temperatures and the parameters which have been set. At
the same time, the current measurement values of temperature sensors are also shown
in the display for the purposes of function control.
If operating mode “Reference value” is selected, (Menu 4.1), the reference flow tempe
-
rature has to be set here, regardless of the curve/outdoor temperature.
Settings range: 10 °C to 75 °C
Default: 30 °C
If operating mode “Reference value” is selected, (Menu 4.2), the reference flow tempe
-
rature has to be set here, regardless of the curve/outdoor temperature.
Settings range: 10 °C to 75 °C
Default: 30 °C
If operating mode “14 day reference value” is selected (Menu 4.1), the reference flow
temperature for each of the 14 days can be set here.
In the first menu 4.4.1 the starting time of the program is shown. To start the program,
hit restart.
Hitting “restart” again will reset the 14 day reference program and start it at day 1.
If operating mode “14 day reference value” is selected (Menu 4.2), the reference flow
temperature for each of the 14 days can be set here.
In the first menu 4.7.1 the starting time of the program is shown. To start the program,
hit restart.
Hitting “restart” again will reset the 14 day reference program and start it at day 1.
4.3 Manual
4.4 Heat circuit reference
4.6 Heat circuit2 reference
4.5 14 day reference
4.7 Heat ciruit2 14 day reference
Operating modes
Danger
The operating mode “Manual” may only be used by specialists for brief
function tests, e.g. during commissioning!