17
3. Times
Caution
Menu “3. Times” is used to set the time,
date, operating times for the heating circuit
and hot water.
The menu is closed by pressing “esc” or
selecting “Exit display mode”.
The associated temperature re-
ference values are specified in
menu 5 “Settings”!
3.1 Time & Date
This menu is used to set the current time and date.
3.2 Heating circuit day
This menu is used to select the daytime mode times for the heating circuit; three time
periods can be specified for each weekday and copied over to the following days.
Setting range: Three time ranges for each day of the week
Default: Mo-Su 6:00-22:00
Note: See 5. for the associated temperature settings
3.3 Heating comfort
This menu can be used to select a time range for each day of the week in which the
heating circuit is supplied with an increased comfort temperature, e.g. for quick heating
in the morning.
Setting range: One time range for each day of the week
Default: Mo-Su off
Note: See 5. for the associated temperature settings.
Times
Caution
For proper functioning of the controller and statistics for the system data it
is essential for the time to be set accurately on the controller. Please note
that the clock continues to run for about 24 hours if the mains voltage is
interrupted, and after that has to be reset.
Caution
Times that are not specified are automatically considered to be nighttime
mode. The set times are only taken into account in the heating circuit
operating mode “Automatic”