Sophos SM2000, Руководство пользователя

Страница: 13 / 237

Indicates State Color LED Key
System Overheated On Red Temp. Sensor
System Normal Off
Shows rack location front and back Off Blue Unit ID LED (SM5000 only)
Linked On Green NIC1 (config)
Config connection established Blink
Disconnected Off
Linked On Green NIC2 (non-bridged only)
Config connection established Blink
Disconnected Off
HDD Activity Blink Amber HDD LED
No Activity Off
System On On Green Power LED
System Off Off
The front panel LEDs are on the upper-right corner of the front panel, to the left of the reset
and power buttons (and to the right of the Unit ID button on the SM5000).
Important: Sophos strongly suggests that you use the software shutdown and restart options
as documented on the
System Status on page 188 page. Although a quick press and release of
the appliance’s power button will perform an elegant shutdown, if the power button is held down
for four seconds or more, an inelegant, immediate shutdown is performed. Also, the reset button
on the appliance always triggers an inelegant, immediate restart, so again the software option is
preferred. Using the appliance’s power and reset buttons may lead to file corruption and data
loss.
Rear Panel LEDs
Indicators on the rear of each appliance provide status information and warnings. The arrangement
of the rear panel LEDs depend upon whether the appliance is configured with a bridge card. There
Sophos Web Appliance | Getting Started | 13