1-16 (E)
VPL-EX100
1
S out-pre-polarizer (R) assembly
2
S out-pre-polarizer (G) assembly
Front side
3
S out-polarizer (G) assembly
A
4
S out-pre-polarizer (B) assembly
5
S out-polarizer (B) assembly
1-3-13. S Out-polarizer (G)/(B) Assembly and S Out-pre-polarizer (R)/(G)/(B)
Assembly
n
The out-polarizer (R) assembly is not replaceable because it is pasted on the prism.
.
Remove the upper case assembly. (Refer to Section 1-3-1.)
.
Remove the rear panel. (Refer to Section 1-3-2.)
.
Remove the main board. (Refer to Section 1-3-3.)
.
Remove the G board. (Refer to Section 1-3-4.)
.
Remove the lamp duct. (Refer to steps
1
and
2
in Section 1-3-5.)
.
Remove the speaker. (Refer to Section 1-3-6.)
.
Remove the optical block. (Refer to Section 1-3-7.)
.
Remove the lens assembly and S prism block assembly. (Refer to Section 1-3-12.)
