2-14 (E)
VPL-EX100
2-5-6. Writing of DDC Data
1. Connect the AC plug and set this unit to standby state.
2. Double-click QuickAccess.exe to start the application.
3. Select a target model on the Model pull-down menu.
4. Select Load on the Load/Save pull-down menu.
5 Select DDC on the 3dgm/Lut pull-down menu.
6. Click
the
[Next]
button.
7. Click
the
[Browse...]
button.
The
fi
le selection window is displayed.
8. Set the destination
fi
le for the writing data as below.
DDC data for INPUT A:
****
_a_0_
**
DDC data for INPUT B:
****
_a_1_
**
m
.
For VPL-EX100, set INPUT A only.
.
****
means model name, and
**
means version.
9. Click
the
[Next]
button.
10. Select the serial port used for connecting PC on the Serial Port pull-down menu.
Upper line: Serial port number used for connecting PC
Lower line: 38400 (not selectable)
11. Click the
[Next]
button.
The window displaying the
fi
le path, model name written in
fi
le, unit serial, serial number, and DDC
ID is displayed.
12. Click the
[OK]
button.
The writing starts. Completed is displayed after completed.
13. Disconnect the AC plug.
14. Click the
[Complete]
button.
