1-13 (E)
VPL-EX100
1
Harness
2
Two screws
(BVTP3
x
10)
5
Screw
(BVTP3
x
10)
3
Lamp house
4
Two DC fans
n
When attaching, place the label
side facing frontward.
X3
Power supply (Ballast)
Label side
Label side
7
Harness
6
U board
1-3-11. DC Fan (Exhaust) and U Board
.
Remove the upper case assembly. (Refer to Section 1-3-1.)
.
Remove the rear panel. (Refer to Section 1-3-2.)
.
Remove the main board. (Refer to Section 1-3-3.)
.
Remove the G board. (Refer to Section 1-3-4.)
.
Remove the lamp duct. (Refer to steps
1
and
2
in Section 1-3-5.)
.
Remove the speaker. (Refer to Section 1-3-6.)
.
Remove the optical block. (Refer to Section 1-3-7.)
.
Remove the DC fan (Intake). (Refer to Section 1-3-8.)
.
Remove the front panel assembly. (Refer to steps
1
to
4
in Section 1-3-10.)
