76
US
Listening to music of a
Bluetooth
device
You can play music of a
Bluetooth
device
via this receiver after pair and connect the
Bluetooth
device with the receiver.
Pairing is an operation where
Bluetooth
devices register with each other
beforehand. Use the procedure below to
pair the receiver with your
Bluetooth
device. Once a pairing operation is
performed, it does not need to be performed
again. If pairing is already completed,
proceed to “Playing music of a
Bluetooth
device” (page 77).
1
Place the
Bluetooth
device within
1 meter (3.3 feet) from this
receiver.
2
Press BLUETOOTH to select
Bluetooth
function.
3
Hold down BLUETOOTH for
2 seconds to activate the pairing
mode of the receiver.
“Pairing ready” appears and “BT”
flashes quickly on the display panel.
Perform step 4 within 5 minutes,
otherwise pairing will be canceled. In
this case, repeat this step.
4
Perform pairing on the
Bluetooth
device to detect this receiver.
For details, refer to the operating
instructions of your
Bluetooth
device.
A list of detected devices may appears
on the
Bluetooth
device display
depending on the type of
Bluetooth
device. This receiver is displayed as
“STR-DN840”.
When establishing a connection with this
receiver, select the audio profile (A2DP,
AVRCP) at the
Bluetooth
device. If the
Bluetooth
device does not support the
AVRCP profile, you cannot perform
playback or other operations with this
receiver (page 75).
5
Select “STR-DN840” on the
Bluetooth
device display.
If “STR-DN840” is not displayed,
repeat from step 1.
6
If passkey
*
is required on the
display of the
Bluetooth
device,
enter “0000”.
7
Once pairing is completed,
connect this receiver with the
Bluetooth
device.
Depending on the device, connection
is automatically made along with the
pairing. Once the connection is
established, the device name appears
and “BT” lights up on the display
panel.
* Passkey may be called “Passcode”, “PIN code”,
“PIN number” or “Password”.
• The receiver only supports numerical passkey
up to 4 digits.
• You can pair up to 9
Bluetooth
devices with this
receiver. If 10th
Bluetooth
device is paired, the
least recently connected device will be replaced
by the new one.
• To pair with other
Bluetooth
devices, repeats
steps 1 to 6.
Pairing the receiver
with a
Bluetooth
device
BLUETOOTH
Note
Notes
Содержание STR-DN840
Страница 1: ...4 454 467 13 1 STR DN840 Multi Channel AV Receiver Operating Instructions ...
Страница 138: ......
Страница 139: ......
Страница 140: ... 2013 Sony Corporation Printed in Malaysia 4 454 467 13 1 ...