Sony STR-DN840, Руководство по эксплуатации

Страница: 103 / 140

103
US
U
s
ing
th
e Remo
te C
ont
rol
Reassigning the input
button
You can change the default settings of the
input buttons to suit the equipment in your
system. For example, if you connect a Blu-
ray Disc player to the SAT/CATV jack on
the receiver, you can set the SAT/CATV
button on this remote control to control the
Blu-ray Disc player.
You cannot reassign the TV, TUNER,
BLUETOOTH, USB, HOME NETWORK, SEN
input buttons.
1
While holding down the input
button of which you want to
change the assignment, hold down
TV
? / 1 .
Example: While holding down
SAT/CATV, hold down TV
? / 1 .
2
With the TV ? / 1 button held,
release the input button.
Example: With the TV ? / 1 button
held, release SAT/CATV.
3
Referring to the following table,
press the corresponding button for
the category you want, then
release TV
?
/
1
.
Example: Press 1, then release TV ? / 1 .
Now you can use the SAT/CATV
button to control the Blu-ray Disc
player.
a)
For details on the BD1 or BD3 setting, refer
to the operating instructions supplied with
the Blu-ray Disc player or Blu-ray Disc
recorder.
b)
Sony DVD recorders are operated with a
DVD1 or DVD3 setting. For details, refer
to the operating instructions supplied with
the DVD recorders.
c)
Sony VCRs are operated with a VTR 3
setting which corresponds to VHS.
Using the Remote Control
Note
Numeric
buttons
TV ? / 1
Input
buttons
Categories Press
Blu-ray Disc player
(command mode BD1)
a)
1
Blu-ray Disc recorder
(command mode BD3)
a)
2
DVD player
(command mode DVD1) 3
DVD recorder
(command mode DVD3)
b)
4
VCR
(command mode VTR3)
c)
5
CD player 6