58
Chapter 4 Operating the AIT Library
18
If you selected “2. Multiple Mode” in step 4, perform the following
depending on the number of open slots.
Two or more open slots
The slot moves to the next one.
When it stops, insert another
cartridge and press the [ENTER]
button again. Repeat until all the
cartridges are inserted, then press
the [CANCEL] button.
1
Insert a cartridge and press the
[ENTER] button.
2
The slot moves to the next. Insert
another cartridge in the same
manner and press the [ENTER]
button.
When you press the [ENTER]
button, the slot moves to the next.
3
Repeat until all the cartridges are
inserted, and then press the
[CANCEL] button.
Only one open slot
The element address of the front
slot appears on the first line.
(Nothing appears on the second
line.)
1
Insert a cartridge and press the
[CANCEL] button.
Caution
Do not put your fingers in the slot
when it is moving, as this could
result in injuries.
19
When “[ENTER] to activate” appears, press the [ENTER] button.
If you selected “1. Single Mode” in
step 4, the display on the right
appears.
If you selected “2. Multiple Mode”
in step 4, the display on the right
appears.
The shutter closes and the
initialization is performed.
Caution
Keep your fingers clear of the
shutter when it closes.
20
When the initialization ends, press the [CANCEL] button three times to
return to the menu display.
Insert Tape Slot 01
Next Slot 02
[CANCEL] to exit
[ENTER] to next slot
Insert Tape Slot 01
[CANCEL] to exit
Slot 01
Exit ?
[ENTER] to activate
Insert Tape Slot 01
Exit ?
[ENTER] to activate
Slot 01
Initializing
