52
Chapter 4 Operating the AIT Library
7
Remove the cartridge from the slot.
Raise the cartridge about 1 mm and pull it out.
8
If you selected “1. Single Mode” in
step 4, press the [CANCEL] button.
Note
Even if you selected “1. Single
Mode” in step 4, you can remove a
different cartridge by using the
V
and
v
buttons to select the slot
element address, and then pressing
the [ENTER] button. Because you
did not select “2. Multiple Mode” in
step 4, the cartridge dock shutter
closes and reopens. When it does,
you can remove another cartridge as
explained above. If you do so, when
you are done removing cartridges
press the [CANCEL] button and
proceed to step 10.
9
If you selected “2. Multiple Mode” in step 4, perform the following
depending on the number of inserted cartridges.
Slot 01
Eject Tape
[CANCEL] to exit
