116
Operating Instructions
If you receive a call while making an
intercom call
The intercom call is interrupted. You have to receive
a call either on the base phone or the handset.
Base phone:
Return the receiver to the base phone
and pick it up again.
Handset:
Press
talk
after the handset rings.
Notes
• On the handset, a beep sounds before ringing.
• Return the receiver to the base phone even when you
answer the call on the handset.
On-hook dialing
You can make a call without picking up the receiver.
This is convenient when you wish to check who is
calling before answering or when you wish to listen
to a time announcement or weather forecast.
1 Press
on hook
with the receiver placed on
the base phone.
You will hear a dial tone.
2 Dial the number using the number
buttons.
3 Pick up the receiver after you hear the
called party's voice.
If you just listened to time announcement or
weather forecast without picking up the receiver,
press
on hook
again to disconnect the line.
Notes
• If the called party's voice is low, you may not be able to
hear the voice clearly.
• If it is noisy, the called party's voice may be interrupted.
We recommend you use this function in a quiet place.
• If you have pressed a wrong button, press
on hook
and
start all over again.
Adjusting the speaker volume
The volume is factory-set to medium.
While listening to the voice or recorded messages
from the speaker,
press volume
or
.
Switching between on-hook dialing
and normal conversation
To switch from on-hook dialing to normal
conversation, pick up the receiver.
To switch to on-hook dialing while speaking into the
receiver, press
on hook
.
Using the phone
directory
Storing phone numbers in the phone
directory
You can dial a number by scrolling through the
phone directory, in which up to 20 phone numbers
can be stored.
Base phone:
1 Press
flash/program
and
1
continuously
with the receiver placed on the base
phone.
The smallest program number available is
displayed.
2 Press
or
to display the desired
program number.
3 Press
flash/program
.
4 Enter the phone number you wish to
store.
You can enter up to 20 digits. Make sure you
enter the area code first.
5 Press
flash/program
.
A beep will sound for confirmation.
Handset:
1 Press
flash/program
and
1
continuously
when a call is not in progress.
“
ナマエ
?
” is displayed.
2 Enter the name using the dialing buttons.
You can enter up to 12 letters. If you do not enter
a name, go ahead to step 3.
3 Press
flash/program
.
4 Enter the phone number you wish to
store.
You can enter up to 20 digits. Make sure you
enter the area code first.
5 Press
flash/program
.
A beep will sound for confirmation.
When the directory is full
After step 1, “
” (on the base phone) or
“
C42
メモリフル
” (on the handset) will be
displayed.
Tips
• If you enter a wrong number in step 4, erase the number
and start from the beginning.
• Even if you store the phone number with the area code,
the fee will be the same as that of a local call.
