— 7 —
Basics
22
US
1
Pick up the handset from the
base unit.
2
Press
(TALK)
and wait until
“TALK” appears on the display.
The display also shows the talk
time in hours, minutes and
seconds.
The dialing keys light up.
The IN USE lamp on the base
unit lights up.
You then hear a dial tone. If you
hear five short error beeps and
“OUT OF RANGE” appears on
the display, move closer to the
base unit.
3
Dial the phone number.
4
When you’re done talking, press
(OFF)
or replace the handset on
the base unit.
The display turns off.
Basics
Making calls
Additional tasks
To
Do this
Adjust the handset volume
Set the VOL switch to H (high), M (middle)
or L (low).
Switch to tone dialing temporarily Press
(*TONE)
after you’re connected.
The line will remain in tone dialing until
disconnected.
Switch to another call
Press
(CALL WAITING/FLASH)
.
(“call waiting” service*)
Press
(CALL WAITING/FLASH)
again to
return to the first caller.
* You need to subscribe to this service from your telephone company.
(CALL WAITING/FLASH)
(*TONE)
VOL switch
(REDIAL/PAUSE)
Basics
23
US
Basics
Notes
• When you increase the sound volume, in some cases the background noise
may be increased as well. You should adjust the volume accordingly.
• If the handset beeps every second during conversation and “OUT OF
RANGE” appears on the display, move closer to the base unit; otherwise, the
call will be disconnected after one minute.
• While the base unit is in use, you cannot make a call with the handset. If you
press
(TALK)
, “BASE UNIT IN USE” appears on the display and you will
hear a busy tone.
EZfit
The “EZfit” adjusts to fit any shape ear,
thereby ensure clear voice reception.
If the battery becomes weak during a call
The handset will beep twice per second,
E
and “BATTERY LOW”
appear on the display. Finish your call and charge the battery pack.
For optimum performance, charge the battery for a full 12 hours.
Note that during the initial charge time (approx. 10 minutes),
E
and
“BATTERY LOW” appear on the display and the phone cannot be
used.
After
E
and “BATTERY LOW” go off, you
may
be able to use the
phone, but the battery duration will be
very short
; thus it is
recommended that you
fully charge
the battery before next use.
continued
Basics
24
US
Making calls (continued)
Redialing
1
Press
(TALK)
and wait until “TALK” appears on the display.
2
Press
(REDIAL/PAUSE)
to redial the number last dialed.
Note
If the number exceeds 32 digits, five short error beeps will alert you that the
number cannot be dialed.
To check the phone number before redialing
While the handset is not in use, press
(REDIAL/PAUSE)
.
The number last dialed is displayed for 20 seconds.
To dial the number, press
(TALK)
while the number is displayed.
Note
The number will not be displayed if the last dialed number exceeds 32 digits or
if it is erased.
To erase the last phone number dialed
While the handset is not in use, press
(REDIAL/PAUSE)
twice.
The number will be erased from the memory, and you will hear a long
confirmation beep.
Basics
25
US
Basics
1
When you hear the phone ring,
pick up the handset from the
base unit, and press
(TALK)
.
“TALK” appears on the display
and the display also shows the
talk time in hours, minutes and
seconds.
2
When you’re done talking, press
(OFF)
or replace the handset on
the base unit.
The display turns off.
Tip
If you have subscribed to the Caller ID service;
• the caller’s number and/or name appears on the display when you receive a
call (see page 51)
• the ringer sound changes to a higher tone if the call matches the number
stored on ONE-TOUCH DIAL buttons or in the Phone Directory (memory
match function; see page 51).
To switch to another call (“call waiting” service*)
Press
(CALL WAITING/FLASH)
.
Press the button again to get back to the first caller.
* You need to subscribe to the service from your telephone company.
To turn the ringer off
Set the RING switch on the bottom to OFF.
The handset won’t ring. You can still make calls, and
also receive calls if another telephone connected to
the same line rings to inform you on incoming calls.
You can also page the handset from the base unit.
Receiving calls
(CALL WAITING/FLASH)
RING switch
Содержание SPP-A9171 - Cordless Telephone With Answering Machine
