16
17
Enjoy the silence
This projector ventilates the heat of the
power supply and lamp as shown in the
diagram above. The flow of air is designed
for low resistance to let the intense heat of
the pure xenon lamp dissipate quickly and
deaden the noise from the fans.
The intake air from ventilation holes cools
down the power supply circuit first, then is
blown onto the lamp.
To ensure virtual silence, this projector uses
closed air ducts from the fans to the lamp,
giving full consideration to aerodynamics.
By installing the two large fans in the inner
part of the unit, the driving noise of the fans
does not escape from the cabinet. Wind
noise is also reduced by decreasing the
revolution of the fan blades.
Flow of air
Ventilation holes
(exhaust)
Fan
Side ventilation
holes (intake)
Fan
Front ventilation
holes (intake)
The calorific value of the pure xenon lamp is
very high, reaching hundreds of degrees
without cooling off. To dissipate the heat, the
projector is provided with an efficient cooling
structure in which heat sinks with a radiation
coating are installed around the lamp. This
unique configuration is made of extruded
aluminum.
Heat sink with a radiation coating
A 5 mm thick foamed aluminum panel is
located on the top of the cabinet. This
material, used in building construction,
reduces fan noise to a bare minimum,
ensuring that you will only hear the sound
from your audio system.
This projector focuses on achieving silent
operation as a natural progression of the
pursuit for high picture quality. This result is
a nearly non-existent noise level, quieter than
a whispery voice.
Previously, realistic high quality visuals and
smooth motion was available only in movie
theaters. You can now enjoy them in the
comfort of your home.
5 mm foamed aluminum panel
Overview