24
25
Inserting batteries
1
Turn the screw counterclockwise using a
coin, etc. to open the lid.
2
Insert the four size AAA (R03) batteries
(supplied), taking care to match the
polarities as shown below.
Identification of parts (continued)
3
Replace the lid, then turn the screw
clockwise to lock the lid.
Be sure to insert
the batteries from
the
#
side first.
Turn clockwise.
Notes on batteries
• Make sure that the battery polarity (orientation) is
correct when inserting batteries.
• Do not mix an old battery with a new one, or mix
different types of batteries.
• If you do not intend to use the remote for a long
time, remove the batteries to avoid damage from
battery leakage. If batteries have leaked, remove
them, wipe the battery compartment dry and
replace the batteries with new ones.
Notes on remote operation
• Make sure that there is nothing between the remote
and the remote detector on the projector to obstruct
the infrared beam.
• The operating range is limited. The shorter the
distance between the remote and the projector is,
the wider the angle within which the remote can
control the projector.
• Even when you use the remote as a wired remote,
batteries must be inserted in the remote.
Turn
counterclockwise.
Overview
