Adjusting the Height of the Monitor (with SU-561 only)
53
Adjusting the Height of
the Monitor (with SU-561
only)
PVM-2541 and PVM-1741 can be mounted on the
optional SU-561 Monitor Stand. You can adjust the
height of the monitor on three levels (for PVM-2541) or
four levels (for PVM-1741) by changing the position of
the stand attachment bracket and the arm attachment
position.
A and B in the following list indicate the screw holes
shown in the illustrations of steps
2
and
4
.
Height of the monitor
Unit: mm (inches)
*1 You cannot attach the stand in combination of these
positions.
The following explains how to adjust the height of the
stand. For details on mounting the monitor on SU-561,
refer to the Mounting Instructions of SU-561.
1
With the pre-attached monitor stand
Remove the stand (see page 52).
With SU-561
Remove the stand and stand attachment bracket
(see page 54).
2
Attach the stand attachment bracket to the A or B
screw holes.
3
Attach the stand attachment bracket with four
screws.
When removing the pre-attached monitor
stand in step 1
Use the screws supplied with SU-561.
When removing SU-561 in step 1
Use the screws removed in step
5
of “To remove the
stand and stand attachment bracket” (see page 54).
4
Attach the arm.
5
Secure the arm with four screws.
When removing the pre-attached monitor
stand in step 1
Use the screws supplied with SU-561.
When removing SU-561 in step 1
Use the screws removed in step
3
of “To remove the
stand and stand attachment bracket” (see page 54).
Position of the stand
attachment bracket
A
A
B
B
Arm attachment
position
B
A
B
A
PVM-2541
–*
1
460
(18 1/8)
469
(18 1/2)
495
(19 1/2)
PVM-1741
372
(14 3/4)
398
(15 3/4)
407
(16 1/8)
433
(17 1/8)
SDI
OUT
OUT
IN
COMPOSITE
OUT
IN
IN
AUDIO
PARALLEL
REMOTE
SERIAL
REMOTE
A
A
A
A
B
B
B
B
B
A
A
A: Screw holes for low position
B: Screw holes for high position
SDI
OUT
OUT
IN
COMPOSITE
OUT
IN
IN
AUDIO
PARALLEL
REMOTE
SERIAL
REMOTE
A
A
B
B
B
B
A
A
A
A
B
B
B
B
A
A
Hang the hook of the bracket
for using the A screw holes.
Hang the hook of the
bracket for using the
B screw holes.
