A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory Menu
79
STARTTLS
To use the encryption function by STARTTLS, select
On
.
Note
The model on sale in China does not support the
STARTTLS function.
Authentication
Select whether authentication is required when you send
an e-mail.
Off:
No authentication is required when an e-mail is
sent.
On:
Authentication is required when an e-mail is sent.
Select one of the authentication methods from the
following and specify the
POP server name
,
User
name
and
Password
as required.
SMTP:
SMTP authentication is required.
POP before SMTP:
POP before SMTP
authentication is required.
Note
When you set
Authentication
to
On
, be sure to select
either or both
SMTP
or/and
POP before SMTP
.
POP mode
Select POP3 or APOP as the authentication method for
POP authentication.
Note
The model on sale in China does not support the APOP
authentication.
Wait time after POP
Set the waiting time in
POP before SMTP
before
SMTP authentication after POP authentication is
completed. Timeout can be set from 0 to 10,000 msec.
POP server name
This is necessary when
POP before SMTP
is selected
for
Authentication
.
Type a POP (receiving mail) server name using up to 64
characters, or type the IP address of the POP server. This
setting is necessary when the SMTP server that sends e-
mails performs authentication using the POP user
account.
POP port number
Enter a port number from 110 to 65535.
The standard port number is 110. If TLS is enabled, the
standard port number for POP3s is 995.
Authentication mode
Select
Login
or
CRAM-MD5
as the authentication
method for SMTP authentication.
Note
The model on sale in China does not support the
CRAM-MD5 authentication.
User name, Password
Type the user name and the password of the user who
owns the e-mail account. This setting is necessary when
the SMTP server that sends e-mails performs
authentication.
Administrator e-mail address
Type the e-mail address of the recipient of a warning
mail (e-mail address of the camera Administrator),
using up to 64 characters.
OK/Cancel
See “Buttons common to every menu” on page 35.
Alarm recording Tab — Setting the
Image memory function when
detecting the alarm
You can set to record the image and audio file to the
memory linked with an external sensor input or built-in
detection functions.
Alarm recording
Select
On
to record the image and audio file in the built-
in memory or SD memory card, linked with alarm
detection.
Image file name
Type the file name you want to assign to the image(s) to
be recorded. You can use up to 10 alphanumeric
characters, - (hyphen) and _ (underscore) for naming.
