Ot
her
s
Using the SNC toolbox
109
Creating a task
1
Click
Add
.
Displays
Task Wizard
.
2
Click
Next
.
3
Select a device to which the task is assigned.
A list of devices registered in My device is
displayed. Select the device you want to assign the
task to from the My device list, and register in
Device(s) in task list.
My Device:
Display a list of cameras registered in
My devices.
Device(s) in task:
Display a list of devices set to
execute a task.
Add:
Register a device in Device(s) in task.
Remove:
Removes a device from Device(s) in task.
Up/Down:
Changes the order of devices in
Device(s) in task.
4
Click
Next
.
5
Select the task action.
Select
Device Setting
or
Firmware Upgrade
.
6
Click
Next
.
For Device Setting:
Edit the value for the setting you wish to change.
See “Device Setting” on page 110 for changing the
values.
Click
Next
to display the confirmation screen for
setting change. Check to see if the setting is correct.
If correction is needed, click
Back
to return to the
previous screen to redo the setting.
For Firmware Upgrade:
Set the firmware for the device you want to
upgrade.
See “Using the Firmware Upgrade” on page 107 for
setting firmware.
7
Click
Next
.
8
Set the schedule.
Task name
Name the task.
Recurrence pattern
Specify the operation interval.
Onetime:
Runs the task once.
Hourly:
Specify the operation frequency in units of
hours. (Possible set value: 1 to 99)
