Sony HDCAM-SR SRW5100, Руководство по эксплуатации

Страница: 13 / 149

13
1-1 Features
Chapt
er 1 Ov
e
rv
ie
w
• Use the scrollable PF ASSIGN menu to display the items
that can be registered, and to select and register the most
frequently used menu items.
• Use the scrollable VTR SETUP menu to display the
items necessary for making initial settings, and to
directly change settings without registering them with
the function buttons for each menu.
• Use the PANEL SETUP menu to set control panel
operations, such as the keyboard sound output.
MAINTENANCE menu
Use this menu to access the maintenance functions.
For details, refer to the Maintenance Manual Volume 1.
A full complement of storage/recall
functions
These functions allow you to use titles to store and recall
menu settings in either this unit’s internal memory banks
or “Memory Stick.”
VTR memory banks
These memory banks allow you to store up to eight pages
of settings for this unit in addition to the current settings.
Factory settings are also stored here, allowing this unit to
be reset to these values at any time.
“Memory Stick”
“Memory Stick” can hold the current settings of this unit
as well as up to eight pages of settings. “Memory Stick”
thus allows you to store and recall the entire contents of the
VTR memory banks.
Title function
This function allows you to add titles when storing data to
the VTR memory bank or “Memory Stick,” thus
facilitating data retrieval and management.
Write protect function
Setting pages stored in VTR memory banks or “Memory
Stick” can be write protected on an individual basis.
A full range of editing functions
An SRW-5100 unit and a recorder (e.g., SRW-5800) can
be connected allowing automatic or manual assemble and
insert editing. This unit also features a full range of editing
functions, including preview, review, preroll, and the
setting or changing of edit points.
Quick access to edit points
The following methods are provided for the setting of edit
points:
• Multi-cuing for up to 100 edit points
• Search dial with shuttle and jog functions
• Direct input through numeric buttons
DMC (Dynamic Motion Control) playback
Using the DT
®
(Dynamic Tracking) heads, you can play
back a section of an edit at speeds between –1 and +2 times
normal speed and store the speed variation in memory for
later use in automatic playback.
DMC playback cannot be selected for HDCAM-SR
format.
When edited audio is played with this unit, fade-out/fade-
in processing is carried out in normal-speed playback only.
Display of duration between edit points
The duration between IN and OUT points can be displayed
by simultaneously pressing the IN and OUT buttons.
Digital time counter
The time counter display shows CTL and time codes
(LTC/VITC
3)
), or user bits data for precise setting of edit
points.
3) LTC (Longitudinal Time Code):
Time code recorded on a longitudinal track
VITC (Vertical Interval Time Code):
Time code recorded on a video track during the vertical blanking interval
Note
Note