Sony HDCAM-SR SRW5100, Руководство по эксплуатации

Страница: 12 / 149

12
1-1 Features
Ch
apt
er 1 Ov
e
rv
ie
w
Capstan override function
You can adjust the playback speed by ±15% to ensure
synchronization between, for example, two units playing
back the same program.
Noiseless playback cannot be performed for HDCAM-SR
format when playback speed e1 times normal
speed.
Independent audio level control
It is possible to adjust the playback level either
independently on each channel or simultaneously on all 12
channels for HDCAM-SR format while monitoring the
peak values. For Digital Betacam or HDCAM format,
adjusting the playback level is possible either
independently on each channel or simultaneously on all
channels (4 channels and the cue track audio).
Tele-File
2)
memory label system
This unit incorporates the Tele-File memory label system
to allow users to read, write and update videocassette
management information, log data (IN/OUT points) and
cue point data on memory labels, providing greater
efficiency in cassette management and editing.
2) Tele-File
A contact-free system for writing, reading, and modifying video cassette-
related information on IC memory-bearing labels. Tele-File is a trademark
of Sony Corporation.
Features for ease of operation
Remote control operation
This unit has a serial RS-422A 9-pin connector to allow
control of this unit by an external control unit.
This unit also comes with 9-pin REMOTE 1-IN(9P) and
REMOTE 1-I/O(9P) connectors to support bridge
connection of multiple SRW-5100 units or other VTRs
equipped with 9-pin remote connectors for simultaneous
operation using a contol device. Furthermore, you can
control this unit from an external control unit with a
parallel (50-pin) interface.
Digital hours meter
The meter can show the total elapsed time since this unit
was turned on, total drum revolution time, total tape
running time and total number of threadings and
unthreadings.
Self-diagnosis
This function allows this unit to perform self diagnostics
when a malfunction occurs. An error message is displayed
and a history of all errors that have occurred is recorded.
Easy-to-maintain plug-in boards
This unit uses plug-in circuit boards to simplify servicing
and inspection.
Mountable in standard 19-inch rack
The unit can be mounted in an EIA-standard 19-inch rack.
For rack mounting, refer to the Installation Manual.
1-1-2 Features of the Control Panel
The control panel provides eight menu screens
corresponding to different operation modes to allow fast
and easy adjustment of necessary settings, as well as the
ability to store menu settings to a “Memory Stick” for later
recall.
Menu-driven operations for a variety of
purposes
Eight menus are displayed on the 130
×
95 mm
(5
1
/
8
inches
×
3
3
/
4
inches) color display and are set using
the 10 function buttons.
You can register desired items to the menus other than the
SET UP menu.
Pressing the
[F4]
(PF ASSIGN) button in the SET UP
menu displays the menu items that can be registered.
HOME menu
Use this menu to make the basic settings for playback
operations.
TC menu
Use this menu to make time code settings.
VIDEO menu
Use this menu to adjust the video signals. The VIDEO
menu screen shows the operation mode, current position
time code, time code type, and so on.
AUDIO menu
Use this menu to adjust the audio signals. The AUDIO
menu screen shows the operation mode, current position
time code, time code type, and so on.
CUE menu
Use this menu to set up to 100 cue points. In page mode,
10 cue points per page can be set on a total of 10 pages. In
the TELE FILE menu, you can change the setting for the
memory label system Tele-File.
PF1/PF2 (Personal Function) menus
Use these menus to register up to 40 of the most frequently
used items from the other menus (up to 10 items each can
be registered to PF1, ALT/PF1, PF2 and ALT/PF2).
SET UP menu
This menu enables the following settings.
• The VTR BANK menu allows up to eight pages of menu
settings to be saved.
• Use the MEMORY CARD menu to store current settings
of this unit and up to eight pages of the contents of the
VTR memory bank to a “Memory Stick.”
Note