Sony HDCAM-SR SRW5100, Руководство по эксплуатации

Страница: 106 / 149

106
Error Messages and Warning Messages
A
ppe
ndix
To clear a warning message
To cancel the display of a warning message, see “Clearing
warning messages” on page 107.
Item number Display Meaning
01 NO EXTERNAL REFERENCE There is no reference signal on the selected REF. INPUT
connector. This unit is using an internal reference signal.
02 LOST LOCK Capstan servo lock was lost during playback.
03 NO EXTERNAL REFERENCE ON
FC When the VTR SETUP menu item A05 “PD EXT SD REF LOCK
MODE” is set to “lock1” or “lock2”, no external SD reference signal
is input.
04 HD & SD REF ASYNCHRONOUS When the VTR SETUP menu item A05 “PD EXT SD REF LOCK
MODE” in is set to “lock1” or “lock2”, HD reference signal and
external SD reference signal are not synchronized.
05 PLL UNLOCK ON FC The PLL of the HKSR-5001 is not locked on the reference signal.
0B VIDEO DATA ERROR The video data channel condition indicator is lit red.
0F AUDIO DATA ERROR The audio data channel condition indicator is lit red.
10 VITC NOT READ VITC cannot be correctly read from the tape.
11 AUDIO PLL UNLOCKED Audio lock generator PLL not locked to the video reference signal.
14 NO PB RF SIGNAL Playback heads cannot correctly read digital data from the tape.
17 PB FREQUENCY IS UNSUITABLE The cassette is ejected automatically in line with the setting of the
VTR SETUP menu item 018 “AUTO EJECT LEVEL” because the
system frequency of this unit and the frequency of the signal
recorded on the tape do not match.
3B NO LTC REPRODUCED LTC signal not detected on the tape.
52 NO SUPPORTED PB FORMAT The recording format cannot be played back by this unit.
53 SYSTEM MISMATCH The tape cannot be played with the current system settings.
55 VIDEO PLL UNLOCKED Video lock generator PLL not locked to the video reference signal.
61 TELEFILE MEMORY IS FULL The remaining capacity of the Tele-File is low, and therefore the
next recording will overwrite old data.
62 NO AREA FOR TELEFILE DATA
ADDITION There is no space at all in the Tele-File.
63 INVALID FORMAT TELEFILE Parts of the Tele-File format are wrong.
64 TELEFILE DATA WRITE FAIL A write to Tele-File error occurred.
65 NO TELEFILE LABEL The Tele-File could not be recognized, and therefore the cassette is
ejected (HDCAM-SR only).
67 TELEFILE DATA READ FAIL A Tele-File read error occurred.
71 INVALID FORMAT CONVERSION The settings do not allow format conversion.
Warning message
O P E R A T I O N
D R U M R U N N I N G
T H R E A D I N G
T A P E T R A V E L
5 2 9 H O U R S
3 4 H O U R S
2 0 H O U R S
7 8 0 T I M E S
[ 2 6 H ]
[ 1 6 H ]
[ 4 4 9 H ]
Warning mark