Sony HCD-N350, Руководство по эксплуатации

Страница: 17 / 106

Chapter 5: the Tape Player
GB
17
4
Press .
Dubbing starts.
If you set DIRECTION MODE to or
RELAY, recording always stops at the
end of the reverse side.
To stop dubbing
Press .
If you select other sound sources while
dubbing
Dubbing stops.
Audio emphasis is cancelled while dubbing
And it is restored when dubbing is
completed.
You do not have to set DOLBY NR selector
The tape in deck B is automatically
recorded in the same state as tape in deck
A.
Dubbing Another Tape
Manually
When you want to dub only part of the
tape, dub manually at normal speed. Use
TYPE (normal) or TYPE (CrO
2
) tape for
recording.
1
Press EJECT, and insert a recorded
tape in deck A with the side you want to
play facing forward.
Also, insert a blank tape in deck B with
the side you want to record on facing
forward.
Recording and playback will start from
the front side of the tape, unless you
have changed the playing direction
before recording.
Make sure the tabs on the cassette in
deck B have not been removed.
2
Select dual or single-sided recording.
Side in recording
pause mode
1
Press TUNER/BAND several times
until the desired radio band appears.
2
Tune in the radio station you want to
record. (See “Listening to the Radio”, or
“Playing Preset Radio Stations” for
details.)
3
Press EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
4
Select dual or single-sided recording.
5
When you want to reduce the hiss noise
in low-level high-frequency signals, set
DOLBY NR to ON.
6
Press REC.
The REC and (pause) lamps light
and deck B stands by for recording.
The lamp lights and the lamp
flashes for a few seconds, then
disappears.
If you want to start recording from the
reverse side, press so that the
lamp lights steadily.
7
Press to release recording pause.
Recording starts.
If you set DIRECTION MODE to or
RELAY, recording always stops at the
end of the reverse side.
To stop recording
Press .
Adjusting the volume or DBFB will not
affect the recording level
But these controls will change the sound
levels you hear through speakers or
headphones.
1
3
1
2
SYSTEM
POWER –ON
4
Recording From
Another Tape (dubbing)
Dubbing Another Tape
Automatically
You can record the whole tape onto another
automatically by using high speed dubbing.
Use the buttons on the unit and TYPE
(normal) or TYPE (CrO
2
) tape for
dubbing.
1
Press EJECT, and insert a recorded
tape in deck A with the side you want to
play facing forward.
Also, insert a blank tape in deck B with
the side you want to record on facing
forward.
Recording and playback will start from
the front side of the tape, unless you
have changed the playing direction
before recording.
Make sure the tabs on the cassette in
deck B have not been removed.
2
Choose how you want the tape to record
and press DIRECTION MODE
repeatedly until the desired mode
appears.
3
Press HIGH SPEED DUBBING.
The REC and (pause) lamps light
and deck B stands by for recording.
7
1
SYSTEM
POWER –ON
1
6
2
3
4
5
Set DIRECTION
MODE to
or RELAY
To record
One side
Both sides
To dub
One side
Both sides
Set DIRECTION
MODE to
or RELAY
continue to next page
➔
Operation
Dubbing stops at the end of one
side
When the tape in one deck
comes to the end of the front
side, it reverses immediately
regardless of the tape position
in the other deck.
When the tape in one deck
reaches its end of the front side,
it stops until the other tape
come to its end, and then both
tapes reverse together.
Position
RELAY