6-83
HVR-S270J/S270U/S270N/S270E/S270P/S270C
3-10.
CAPSTAN MOTOR
Disassembly/Assembly
(After assembling, adjust the tape path from page 6-94.)
3-9.
PINCH ARM ASSEMBLY
Disassembly/Assembly
For the disassembling and assembling procedures of the tape re-
tainer and compression coil spring (tape retainer), refer to page 6-
93.
Push roller
A
into the
groove as shown in the
figure. Insert roller
B
into
the claw. To remove the
pinch arm assembly, pull
out the pinch arm upward
while pushing the claw.
Capstan motor
Screw
Tightening torque of capstan motor
0.1961
±
0.0196 N • m (2.0
±
0.2 kg • cm)
Be careful not to touch the
motor shaft ( part).
Roller
B
Roller
A
Pinch arm assembly
Claw
Roller
B
Roller
A
Claw
