Sony FilmStation UP-DF750, Руководство по установке и эксплуатации

Страница: 46 / 66

46
Messages
Mi
sce
lla
n
e
ous
2) If the error has occurred on one tray only, the ALARM indicator
will not light, and the READY indication is always shown. In
this case, instead of an error message, the tray status indication
on the LCD panel changes as follows.
Other messages
Besides messages indicating an error, various status
messages may also be shown on the LCD panel, as listed
below.
In these cases, the ALARM indicator does not light.
(The part above the dotted line refers to the status indication, and the
part below the dotted line refers to the job information field.)
Corresponding error
message Tray status indication
[*] Check Tray
2)
Chk Tray
[*] Set Film Set Film
[*] Tag Mismatch
2)
Tag Err M
[*] Tag Invalid T
2)
Tag Err T
[*] Tag Invalid I Tag Err I
Remove Prints Rmv Prt
Message Cause/Countermeasures
Please Wait
The thermal head temperature has
exceeded normal levels.
t Wait until the message disappears.
During continuous printing, operation
will resume when the head has cooled
down and the message disappears.
Head Cooling
Please Wait
The thermal head is currently being
warmed up.
t Wait until the message disappears.
Printing will start when the head
has been warmed up and the
message disappears.
Head Heating
Please Wait
The printer is performing an internal
processing operation such as when
the film tray is opened or closed. The
message is also shown during power-
down.
t Wait until the indication
disappears.
–
Status
Job information
----------------------------------
----------------------------------
----------------------------------
Initializing (Flashes)
Indicates that the printer is carrying
out an initialization routine, such as
when the cover was closed or a
network setting such as the IP address
was changed.
t Wait until the indication
disappears.
–
Processing
Reserved
Image data are being processed.
–
–
In the current condition, a problem
could occur due to the combination of
the size of film inserted in the film
tray and the type of output tray that is
installed. (page 15)
Contact your Sony dealer to have the
output tray size changed.
Output Tray
Mismatch
Message Cause/Countermeasures
----------------------------------
----------------------------------
----------------------------------