Sony DNW-A28, Руководство по эксплуатации

Страница: 45 / 102

Chapter 3 Editing
Chapter 3 Editing
3-3
Playback in search mode using the jog dial allows
finding edit points quickly.
On this unit, you can perform search in the following
three modes: jog and shuttle
Jog mode
Playback speed is determined by the rotation speed of
the jog dial between ±1 times normal speed. Rotate the
dial downward to search in the forward direction, and
rotate the dial upwards to search in the reverse
direction.
Shuttle mode
Playback speed is determined by the rotation angle of
the jog dial between ±24 times normal speed (13
steps). Rotate the dial downward to search in the
forward direction, and rotate the dial upward to search
in the reverse direction.
When using the cassette recorded in Betacam/Betacam
SP format, the playback speed range is between ±10
times normal speed (19 steps).
3-2 Finding Edit Points – Search
Switching between each mode
To put this unit into a search mode, press the
SEARCH button, or rotate the jog dial.
When you press the SEARCH button, the unit enters
the most recently used search mode. When you rotate
the jog dial, the unit enters jog mode.
To switch between search modes, press the jog dial for
1 or more seconds.
To switch between normal playback and
search modes
Press the DATA/PLAY and SEARCH buttons
alternately.
As factory default setting, rotating the jog dial
switches to jog mode at any time except during
recording and editing.
If you change the setting of setup menu item 101, the
above function will be disabled and switching to
search mode will be possible only when the SEARCH
button is pressed.
For details about setting, see item 101 on page 6-8.