Sony DNW-A28, Руководство по эксплуатации

Страница: 75 / 102

Chapter 6 Setup Menu
Chapter 6 Setup Menu
6-13
Menu items in the 400s, relating to preroll
Menu items in the 500s, relating to tape protection
Item number
Item name Settings
401
FUNCTION MODE
AFTER CUE-UP Select the state that the unit goes into after a cuing-up operation.
STOP : Stops (the “STOP mode”).
STILL: Still playback (in search mode).
Note
When controlling this unit from an editor with the standard constants set, select “STOP”.
402 TIME REFERENCE
FOR PREROLL When prerolling a tape section at which timecode signals are discontinuous, select
which to use, the timecode or CTL signals recorded preceding the section, for timecode
advance and preroll.
CTL : Using CTL signals.
TC: Using timecode signals.
403 AUTOMATIC
PREROLL
REFERENCE
ENTRY
Select whether or not the edit IN point is automatically set by pressing the PREROLL
button when the IN point is not set before starting preroll.
DIS : IN point is not set automatically.
ENA: IN point is set automatically.
Item number Item name Settings
STILL TIMER Select the time delay from the tape transport stopping (either the STOP/PAUSE mode
or the still playback mode in search mode) until the unit automatically switches to the
tape protection mode, in order to protect the rotary heads and the tape.
0.5S... 8M ...30M: Set the value in the range 0.5 seconds to 30 minutes.
502 TAPE
PROTECTION
MODE FROM
SEARCH Select the operation of the protection mode to protect the rotary heads and tape when
in the still playback mode in search (jog/shuttle) mode.
STEP : Step forward at
1
/
30
normal speed every 2 seconds.
STDBY: Switch to “Standby OFF mode” (the unit not on standby).
501