Sony DNW-A28, Руководство по эксплуатации

Страница: 76 / 102

Chapter 6 Setup Menu
6-14
Chapter 6 Setup Menu
Extended Menu
Menu items in the 600s, relating to the timecode generator
Item number Item name Settings
601
VITC POSITION
SEL-1
Note
You can insert the
VITC signal in two
places. To insert it
in two places, set
both items 601 and
602.
In 525 mode
Select a line to insert the VITC in.
12H... 16H ...20H: Select any line from 12 to 20.
In 625 mode
Select a line to insert the VITC in.
9H... 19H ...22H: Select any line from 9 to 22.
602 VITC POSITION
SEL-2
Note
You can insert the
VITC signal in two
places. To insert it
in two places, set
both items 601 and
602.
In 525 mode
Select a line to insert the VITC in.
12H... 18H ...20H: Select any line from 12 to 20.
In 625 mode
Select a line to insert the VITC in.
9H... 21H ...22H: Select any line from 9 to 22.
603 ID CODE PRESET Select whether or not to set the ID code.
OFF : Do not set the ID code.
ON: Set the ID code.
To set the ID code:
1
Set this item to ON.
The time data display area in the FL display panel flashes.
2
Turn the jog dial to select the column, then hold down the SEARCH button while
turning the jog dial to change the digit value.
3
When the ID code setting is complete, press the SET button.
This saves the ID code setting, and the setting of this item returns to “OFF”.
604 ID CODE SW Select whether or not to record the ID code set using item 603 in the user bits.
OFF : Record the normal data in the user bits.
ON: Record the ID code in the user bits.
605 TCG REGEN
MODE Select the signal to be regenerated when the time code generator is in the regeneration
mode (i.e., when the PRESET/REGEN switch in the timecode section is set to REGEN,
or the unit is in automatic edit mode).
TC&UB : Both the timecode and user bits are regenerated.
TC: Only the timecode is regenerated.
UB: Only the user bits ane regenerated.