Sony DNW-A28, Руководство по эксплуатации

Страница: 80 / 102

Chapter 6 Setup Menu
6-18
Chapter 6 Setup Menu
Extended Menu
Menu items in the 700s, relating to video control (continued)
712 VIDEO PROCESS
ON CAP LOCK
2FIELD When the CAPSTAN in the submenu or setup menu item 106 is set to 2FLD for 2-field
playback, select whether or not to carry out a “picture shift”.
OFF : No picture shift.
ON: Carry out picture shift.
Note
To eliminate the adverse effect of the residual chrominance subcarrier component in
the Y signal that is the result of the Y/C separation, this unit automatically applies a shift
to the playback image in the H direction, so that even in 2-field playback a satisfactory
image can be obtained.
Item number Item name Settings
713 VIDEO SETUP
REFERENCE
LEVEL (525
system)
Set the video setup amounts to be removed from a recording signal and Betacam
playback signal, and to be added to a composite output signal. There are independent
settings for a recording signal (referred to below as an input signal), a Betacam signal,
and a composite output signal (referred to below as an output signal).
Notes
• Setup removal is carried out only with respect to a Batacam format CAV input signal
(menu setting) and NTSC composite input signal. It is not carried out with respect to
other input signals.
• The setup amounts specified in this menu item have no connection with the SETUP/
BLACK LEVEL knob.
Sub-Item
0 MASTER LEVEL When the input signal, Betacam playback signal, and output signal settings are
“MSTER” (master), the setup amount specified for this sub-item is removed from the
input signal and Betacam playback signal, and is added to the output signal.
0.0% ... 7.5% ...10.0%: Setting in this range, in 0.5% increments.
1 INPUT LEVEL MSTER : Set the input signal to the master setting.
0.0% ... 7.5% ...10.0%: Set the setup amount be removed from the input signal in this
range, in 0.5% increments.
2 INPUT VBLK
CONT
REMOV: Remove the setup amount in the vertical blanking interval of the input signal.
THROU : Do not remove the setup amount in the vertical blanking interval of the input
signal.
3 BETACAM PB
LEVEL
MSTER : Set the Betacam playback signal to the master setting.
0.0%...7.5%...10.0%: Set the setup amount to be removed from the Betacam playback
signal in this range, in 0.5% increments.
4 OUTPUT LEVEL MSTER : Set the output signal to the master setting.
0.0%...7.5%...10.0%: Set the setup amount to be added to the output signal in this
range, in 0.5% increments.
714
VIDEO ADJUST
RANGE
Select the variable range of the VIDEO and CHROMA knobs when the PROCESS
CONTROL in the submenu is set to PANEL.
–3~+3 : –3 dB to +3 dB
WIDE: –
∞
to +3 dB