Sony DNW-A28, Руководство по эксплуатации

Страница: 27 / 102

Chapter 2 Preparations
Chapter 2 Preparations
2-9
T C R . 2 3 : 5 9 . 4 0 . 1 8
*
P S H U T T L E S T I L L
2-5 Information Displayed on the Monitor
1
Time data type
2
Timecode reader drop-frame mark (525 mode)
3
Timecode generator drop-frame mark
(525 mode)
4
VITC data field mark
5
Recorder/player selection
6
Operating mode
Time data
The monitor connected to the VIDEO OUTPUT
connector 2 (SUPER) displays setup menus, error
messages, time data, and information about the unit’s
operating status.
To display superimposed time data and text
information about the operating status of the unit, set
the SUPER in the submenu to ALL (see page 2-23).
To adjust the displayed text
You can adjust the position, size, and type of
superimposed information using setup menu items
002, 003, 009, and 011.
For details, see pages 6-1 and 6-2.
Note
The example above shows the factory default
configuration.
You can use setup menu item 005 to display a different
type of time data in the second line as well.
For details, see page 6-2.
To display superimposed text information
The figure below shows the time data and operation
status that can be superimposed.
For more information about the setup menus, see chapter 6
“Setup Menu”.
1
Time data type
a) Displayed when this unit is used with an editor.
CTL CTL counter data
TCR LTC reader timecode data
UBR LTC reader user bits data
TCR. VITC reader timecode data
UBR. VITC reader user bits data
TCG Timecode generator timecode data
UBG Timecode generator user bits data
IN a) IN point time data
OUT
a)
OUT point time data
AI a) AUDIO IN point time data
DUR a) The duration between any two of the three
edit points (IN, OUT, AUDIO IN)
Display Meaning