5-161
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Washer
Full-erase head
CTL/FE mounting table
CTL head
Connector pins
Screw (PS2
x
4)
Harness (3P)
Harness (2P)
CTL/FE head assembly
Screw (PSW3
x
8)
Removal
1. Harnesses Disconnection
Disconnect the two harnesses from the connectors
of the CTL/EE head assembly.
2. CTL/FE Head Assembly Removal
Remove the screw, then remove the CTL/FE head
assembly.
n
Be careful not to touch the drum (especially,
video heads). Moreover, take care not to damage
the peripheral tape guides.
3. Full-erase Head Removal
(1) Remove the screw and washer, then remove
the full-erase head.
m
.
Be careful not to damage the CTL head
when the full-erase head is removed.
.
Do not loosen or remove the two screws
fixing the CTL/FE mounting table. This
causes the deviation in the zenith of the
CTL head and full-erase head.
(2) Unsolder the connector pins.
5-25. Full-erase Head Replacement
CTL/FE Head Assembly Removal
Full-erase Head Removal