Sony DNW-7, Руководство по эксплуатации

Страница: 137 / 284

Chapter 4 Adjustments and Settings for Recording
4-59
4
Setting change and adjustment progress messages and display modes
Y: Message is displayed.
N: Message is not displayed.
Message display
condition Message Display mode
setting
1 2 3
When the filter selection
has been changed FILTER : n (where n = 1, 2, 3,
4)
When the gain setting
has been changed GAIN : n (where n =
−
3dB,
0dB, 3dB, 6dB, 9dB, 12dB,
18dB, 24dB, 30dB, 36dB,
42dB,TURBO
a) )
N N Y
N N Y
When the setting of the
WHITE BAL switch has
been changed WHITE : n (where n = A CH,
B CH, PRST) or ATW : RUN N N Y
When the OUTPUT/
DCC selector has been
set to DCC ON or OFF DCC : ON (or OFF) N Y Y
When the shutter speed
and mode setting has
been changed
b)
: SS : 1/100 (DNW-7/90/
90WS/9WS) or 1/60 (DNW-
7P/90P/90WSP/9WSP) (or
1/125, 1/250, 1/500, 1/1000,
1/2000, CLS, ECS
c) , EVS)
N Y Y
a) When the TURBO GAIN button is pressed, “TURBO” is displayed
regardless of the GAIN setting.
b) This is also displayed for about 3 seconds when the SHUTTER selector
is set to ON.
c) DNW-90/90P/90WS/90WSP only
When the black or white
balance has been
adjusted E.g. WHITE : OK
For more informarion, see
Section 4-1 “Adjusting the
Black Balance and the White
Balance” (page 4-1). N Y Y