Chapter 4
Menus
Chapter 4
Menus
57
FLASH menu
OTHERS menu
Menu item
Settings
FLASH
Select whether or not to use the flash.
ON: Use the flash. When this setting is selected, the menu
items “•INTERVAL”, “•CUTOFF SW”, and
“•CALIBRATION” appear.
OFF: Do not use the flash.
Factory default setting: ON
•INTERVAL
When the above “FLASH” item is set to “ON,” select the
flash operation interval.
1 sec, 3 sec, 5 sec, 10 sec
Factory default setting: 3 sec
Note
If the setting is less than the charge time for the flash used,
correct automatic control will not be possible.
•CUTOFF SW
When the above “FLASH” item is set to “ON,” select
whether or not to carry out mechanical control of the X-
contacts on the FLASH connector of the digital processor.
ON: Carry out mechanical control.
OFF: Do not carry out mechanical control.
Factory default setting: OFF
Notes
• Normally use the camera with this item set to OFF. Only try
the ON setting if the flash will not work.
• Even when set to “ON,” there is no mechanical control of the
X-contacts on the camera.
•CALIBRATION
When the above “FLASH” item is set to “ON,” measure
the synchronized timing of the flash and the electronic
shutter.
START: Carry out the measurement.
CANCEL: Do not carry out the measurement.
Menu item
Settings
BEEP
Select whether or not to beep for confirming an operation.
ON: Beep.
OFF: Do not beep.
Factory default setting: ON
RESET
Reset all of the user menu settings to their factory
defaults.
START: Carry out the reset.
CANCEL: Do not carry out the reset.
Содержание DKC-ST5
