Sony DKC-ST5, Руководство по эксплуатации

Страница: 38 / 68

Chapter 2
Operation
38
Chapter 2 Operation
“Loop on” mode and “loop off” mode
In “increment on” mode, there are two ways of operating: either the “loop
on” mode or the “loop off” mode.
“Loop on” mode: After an image is captured to memory 9, memory 1 is
automatically selected for the next image.
Note
If there is already an image stored in memory 1 (i.e. the status
indication shows a film icon for memory 1), when you press the
release button this captures a new image to memory 1, and the
previously stored image is lost.
“Loop off” mode: After an image is captured to memory 9, there is no
automatic memory selection, and after the review, the system returns
to the live monitor mode with a message “MEMORY FULL” display.
To switch between “loop on” mode and “loop off” mode
From the main menu, select the CAMERA menu, then set the “LOOP”
item to “ON” (this is the factory default setting) or “OFF.”
Shooting