manualshive.com logo in svg

Sony DKC-ST5, Руководство по эксплуатации

Поделиться
Скачать
Sony DKC-ST5 Скачать руководство пользователя страница 60

Chapter 5

Using the Control Software

60

Chapter 5

Using the Control Software

Preparations

Checking the SCSI Host Adapter

(When using Microsoft Windows 95/98)

Use the following procedure to check that the Adaptec
SCSI host adapter is correctly installed.

1

Start Microsoft Windows 95/98.

2

Open the Control Panel window, and double-click
the System icon.

3

Click on the Device Manager tab, and check that
the host adapter to be used for the SCSI controller
is displayed.

Connecting the DKC-ST5 and computer

Power off the computer, the DKC-ST5, and any other
devices in the system, then connect the DKC-ST5 and
the computer with the SCSI cable.

For details of the SCSI connection, see pages 46 to 49.

Setting the DKC-ST5 SCSI ID

With all of the devices powered off, set DIP switches 6
to 8 on the rear panel of the digital processor to a SCSI
ID which does not conflict with other devices.

For details, see pages 49 and 50.

Note

The DKC-ST5 does not support SCAM (SCSI
Configured Automatically).  Even when using a host
adapter which supports SCAM, you must manually set
an ID which does not conflict.

For details, refer to the documentation provided with your
SCSI host adapter.

Powering on the system

Following the description on page 21, power on the
system.

Installing the Control Software

Use the following procedure to install the control
software in the computer.

When using Microsoft Windows 95/98

1

Start Microsoft Windows 95/98.

When starting Microsoft Windows 95 for
the first time after connecting the DKC-ST5
and the computer

In this case a dialog box appears, prompting you to
install a device driver.
Since the control software is supported by the
ASPI32 manager, no driver installation is required.
In the dialog box, select “Do not install a driver”
and click the OK button.
When starting Microsoft Windows 95 for the
second and subsequent times, this operation is not
required.  The dialog box will, however, appear
again if you change the SCSI ID of the DKC-ST5.

2

Insert floppy disk 1 supplied with the DKC-ST5
into the floppy disk drive.

3

Access the floppy disk, and display a file list.

4

Double-click SETUP.EXE.

The setup program starts.  Thereafter, follow the
directions given in dialog boxes.

Installing the Control Software

Содержание DKC-ST5





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды