Sony DKC-ST5, Руководство по эксплуатации

Страница: 30 / 68

Chapter 2
Operation
30
Chapter 2 Operation
Use the following procedure to adjust the iris setting (f-stop) at the instant
that a still image is captured to memory.
Note
For normal purposes select F5.60 (factory default setting).
1
Set the lens to the automatic iris mode.
2
If in the memory monitor mode, press the LIVE/MEMORY button to
switch to the live mode.
The “LIVE” mode indication appears on the monitor screen.
3
If the status display mode is off, press the CHARACTER ON/OFF
button to switch on the status display.
The f-stop setting appears on the monitor screen.
4
• To increase the numerical value of the f-stop (i.e. to stop down the
iris for still image capture), press the IRIS + button.
• To decrease the numerical value of the f-stop (i.e. to open up the iris
for still image capture), press the IRIS – button.
Note
Changing this setting does not affect the iris during output of live
images. The f-stop setting only takes effect when the release button is
next pressed.
Adjusting the Iris
4
2
3
STDBY USER
LIVE/MEMORY E-ZOOM
IRIS
MEMORY FOCUS ZOOM
FAR
NEAR
T
W
+
--
+
--
MENU ENTER
WB(STILL)
WB(LIVE)
BB
FRAME
ON/OFF
CHARACTER
ON/OFF
1