96
Symptom
Cause and countermeasure
The disc does not
eject.
The CD will not
play.
The sound skips.
The system was moved or shaken with a disc loaded, and the disc has become
lodged inside the CD player.
m
Consult your nearest Sony dealer.
There is no disc in the CD player.
m
Open the disc tray and check whether a disc is loaded. If you open and close
the disc tray while listening to the radio, the CD indicator lights up even when
a CD is not loaded.
The disc is dirty (e.g., oil film, fingerprints).
m
Wipe the disc clean (see page 88).
The disc is scratched.
m
Replace the disc.
The disc is off-center.
m
Place the disc properly in the center of the tray.
The CD is inserted with the label side down.
m
Place the CD in the tray with the label side up.
Moisture condensation has built up on the lens inside the CD player or on the
disc.
m
Remove the disc and wipe away the moisture on the disc, then leave the system
turned on for a few hours until the moisture evaporates.
The CD player is not set to play mode.
m
Press FUNCTION
>
/
.
on the amplifier to switch the function to CD, then
press
·∏
on the CD player (or CD
·
on the remote) to start play.
The disc is dirty (e.g., oil film, fingerprints).
m
Wipe the disc clean (see page 88).
The disc is scratched.
m
Replace the disc.
The disc you tried to play is a non-standard size or shape, or uses a non-standard
recording method.
m
Replace the disc.
The system is subject to vibration.
m
Try moving the system to a place without vibration (e.g., on top of a stable
stand).
m
Try moving the speakers away from the system, or placing them on separate
stands.
When you listen to a track with bass sounds at high volume, the speaker
vibration may cause the sound to skip.
Troubleshooting (continued)
Содержание DHC-EX880MD
Страница 104: ...104 Sony Corporation Printed in Japan ...