86
6
Press CD SYNC on the tape deck.
The tape deck stands by for recording
and the CD is in pause for playback. The
CD SYNC indicator lights up and
“PLAY
·
P
{REC}
” (for front side)
appears.
7
Press
P
on the tape deck.
Recording starts.
To stop recording
Press
p
on the tape deck or the CD player.
Tips
• Pressing
1/u
(power) on the DHC-EX880MD
automatically turns on the TC-TX770 deck if you
connect them to each other using the audio bus
cable.
• If you want to record from the reverse side, press
ª
in step 6 so that “
ª
PLAY
P
{REC}
” (for
reverse side) appears.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side
even though you select
a
.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR*
repeatedly to select B or C before step 5. You
cannot switch DOLBY NR during recording.
• If the tape reaches the end of its front side while
dual-sided recording, the fadeout feature works so
that a track is not abruptly cut off at the end of the
tape (Fade Synchro). The track will be recorded
again from the beginning on the reverse side. The
Fade Synchro feature works during one-side
recording, too.
• You cannot perform CD Synchro Recording by
pressing the CD SYNC buttons on both the tape
deck and the MD deck at the same time.
Use the CD Synchro Recording feature for a tape
and record on an MD manually. This method is
recommended since on the MD deck, you can
erase the overlapping track recorded using the
Fade Synchro feature just by specifying its track
number (Erase Function).
Note
You cannot listen to other sources while recording.
Recording a CD on a tape with the
optional TC-TX770 tape deck
(continued)
* Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing
Corporation.
“DOLBY” and the double-D symbol
a
are
trademarks of Dolby Laboratories Licensing
Corporation.
Содержание DHC-EX880MD
Страница 104: ...104 Sony Corporation Printed in Japan ...