75
To change the setting
Start over from step 1. Press
N
or
n
after
step 5 until the indication you want to change
flashes, then change the setting.
To set/check the timer
Press ONCE or DAILY to turn on the ONCE
or DAILY indicator.
If the indicator is already lit, press the button
once to turn off the indicator, then press it
again.
The check screen appears, then the original
display appears.
To cancel the timer operation
Press ONCE or DAILY to turn off the ONCE
or DAILY indicator.
“TIMER OFF” appears and the timer
operation is canceled.
Tip (for DHC-EX880MD)
When you connect the optional TC-TX770 tape deck
to the system with the audio bus cable (see page 84),
the deck power is also turned on automatically by
the system’s timer. This lets you wake up to the tape
without setting the deck timer.
Notes
• You cannot use the Wake-up Timer at the same
time as the Recording Timer (REC).
• Do not operate the system from the time the
system turns on until the playback starts (about
20 seconds). If you do so, the timer may not
operate correctly.
• If the power is on at the time to turn on, the set
sound source starts playing.
• Optional components other than the TC-TX770
(for DHC-EX880MD only) deck are not activated
by the Wake-up Timer. When using these
components as the sound source, make the same
timer settings on the component side.
• If the timer-on and -off settings are the same,
“OFF TIME NG !” appears and the cursor returns
to the timer-off setting. Change the time to turn
off.
6
Set the time to stop playback
following the procedure in step 5.
The sound source indication appears.
7
Turn MULTI CONTROLLER until
the sound source you want appears.
The indications change as follows:
n
CD
n
MD
n
TUNER
n
TAPE*
* Select “TAPE” to use the optional
component connected to the TAPE jacks as
the sound source.
8
Press
n
.
If you selected “TAPE”, go to step 10.
9
Turn MULTI CONTROLLER until
the desired CD (DISC1 – 3), MD
(DISC1 – 3) or radio station*
appears.
To play the CD or MD tracks in a specific
order, select “PLAY”.
When you select “PLAY” for CD or MD,
the selected (CD 1 – 3 or MD 1 – 3 button
lights green) CD or MD is played.
* DHC-EX880MD: FM1 – 20, MW1 – 10,
LW1 – 10
DHC-MD717: FM1 – 20, AM1 – 10
10
Press ENTER/YES.
The timer type (ONCE or DAILY)
appears, followed by the start time, the
stop time and the sound source, then the
original display appears.
11
Turn off the system.
Содержание DHC-EX880MD
Страница 104: ...104 Sony Corporation Printed in Japan ...