Sony DCR-IP45 - Micromv Digital Camcorder, Руководство по обслуживанию

Страница: 97 / 153

5-31
DCR-IP45/IP45E/IP55/IP55E
17. AF Laser Output Adjustment
Set the AF laser output to an appropriate level.
Subject Paper which reflection rate is 18%
(50cm from the front of the lens)
(Note1)
Measurement Point Adjustment remote commander
Measuring Instrument
Adjustment Page F
Adjustment Address 66 to 6C
Specified Value Data of address: 66 is “10” to “FF”.
Data of address: 6B is “15” to “20”.
Note1:
Background paper (J-2501-130-A). Perform this adjustment in the
dark room or use a dark box.
Note2: Any light other than the laser light should not light up the paper.
Note3:
This adjustment should be carried out upon completion of the
following adjustments.
“HALL Adjustment”, “Flange Back Adjustment”
Note4: The data of page: 0, address: 10 must be “00”.
Note5: Check that the data of page: 6, address: 02 is “00”. If not, to page:
6, address: 01, set data: 00, and press the PAUSE button.
Switch setting:
1) POWER .................................................................. CAMERA
2) NIGHT SHOT .................................................................. OFF
Adjusting method:
Order Page Address Data Procedure
1 0 01 01 Set the data.
2 6 01 AF Set the data, and press PAUSE
button.
3 Check the laser light is output.
4 6 02 Check that the data is “01”.
(Note6)
5 F 66 Check that the data is “10” to
“FF”.
6 F 6B Check that the data is “15” to
“20”.
Note6: The adjustment data will be automatically input to page: F, address:
66 to 6C.
Processing after Completing Adjustments:
Order Page Address Data Procedure
1 6 01 00 Set the data, and press PAUSE
button.
2 0 01 00 Set the data.