Sony DCR-IP45 - Micromv Digital Camcorder, Руководство по обслуживанию

Страница: 101 / 153

5-35
DCR-IP45/IP45E/IP55/IP55E
1. Back Light Adjustment (DI-085 board)
Set the brightness of the back light to the specified level. If deviated,
the EVF screen will become too bright or too dark.
Note:
Do either of the automatic adjustment or the manual adjustment.
1-1. Automatic Adjustment
Mode Camera
Subject Arbitrary
Measurement Point Adjustment remote commander
Measuring Instrument Data of page: 2, address: 53
Adjustment Page C
Adjustment Address 82, 7C
Specified Value C0 to C2
Note: The data of page: 0, address: 10 must be “00”.
Adjusting method:
Order Page Address Data Procedure
1 0 01 01 Set the data.
2 2 53 Check that the data.
When the data is “C0” to “C2”,
proceed to step 9.
When the data is “00” to “BF”,
proceed to step 3.
When the data is “C3” to “FF”,
proceed to step 6.
3 C 82 Increase the data.
4 C 82 Press PAUSE button.
5 Return to step 2.
6 C 82 Decrease the data.
7 C 82 Press PAUSE button.
8 Return to step 2.
9 C 82 Read the data, and this data is
named D
82
.
10 C 7C D
82
Set the data, and press PAUSE
button.
11 C 7C Subtract 60 (Hexadecimal) from
the data, and press PAUSE
button.
12 0 01 00 Set the data.
1-2. Manual Adjustment
Mode Camera
Subject Arbitrary
Measurement Point Pin
eg
(EXT DA) of IC2201
Measuring Instrument Digital volt meter
Adjustment Page C
Adjustment Address 82, 7C
Specified Value A = 2.10
±
0.03Vdc
Note:
The data of page: 0, address: 10 must be “00”.
Adjusting method:
Order Page Address Data Procedure
1 0 01 01 Set the data.
2 C 82 Change the data and set the EXT
DA voltage (A) to the specified
value.
3 C 82 Press PAUSE button.
4 C 82 Read the data, and this data is
named D
82
.
5 C 7C D
82
Set the data, and press PAUSE
button.
6 C 7C Subtract 60 (Hexadecimal) from
the data, and press PAUSE
button.
7 0 01 00 Set the data.