Sony DCR-IP45 - Micromv Digital Camcorder, Руководство по обслуживанию

Страница: 119 / 153

5-53
DCR-IP45/IP45E/IP55/IP55E
2. Treel FG Duty Adjustment (VC-291 Board)
Set the Treel FG signal duty cycle to 50%.
Mode CUE mode without a cassette
Measurement Point Data of page: 3, address: 92
Measuring Instrument Adjustment remote commander
Adjustment Page C
Adjustment Address 2C
Specified Value 70 to 90
Note1: Don’t open the cassette compartment during this adjustment.
Note2:
When this adjustment is performed, data such as date, time and
user-set menus will be lost. After completing adjustments, reset
these data.
Note3:
The data of page: 0, address: 10 must be “00”.
Adjusting method:
Order Page Address Data Procedure
1 Close the cassette compartment
without inserting a cassette.
2 0 01 01 Set the data.
3 C 2C 80 Set the data, and press PAUSE
button.
4 9 74 01 Set the data, and press PAUSE
button.
5 9 81 01 Set the data, and press PAUSE
button.
6 9 CA 03 Set the data, and press PAUSE
button.
7 2 00 29 Set the data.
8 2 01 29 Set the data, and press PAUSE
button.
9 0 01 01 Set the data.
10 3 90 01 Set the data, and press PAUSE
button.
11 Enter the CUE mode without a
cassette.
12 3 92 When the data satisfies the
specified value, proceed to step
15.
When the data doesn’t satisfy
the specified value, proceed to
step 13.
13 C 2C Change the data, and press
PAUSE button.
14 Return to step 11.
15 Enter the STOP mode.
16 9 74 00 Set the data, and press PAUSE
button.
17 9 81 00 Set the data, and press PAUSE
button.
18 9 CA 02 Set the data, and press PAUSE
button.
19 3 90 00 Set the data, and press PAUSE
button.
20 0 01 00 Set the data.
21 Turn off the power and turn on
again.
3. Read Clock fo Adjustment (VC-291 Board)
Set the read clock center frequency of IC1301.
Mode Play back mode without a cassette
Measurement Point Data of page: 3, address: 01
Measuring Instrument Adjustment remote commander
Adjustment Page C
Adjustment Address 6C
Specified Value 00
Note1: Don’t open the cassette compartment during this adjustment.
Note2:
When this adjustment is performed, data such as date, time and
user-set menus will be lost. After completing adjustments, reset
these data.
Note3:
The data of page: 0, address: 10 must be “00”.
Adjusting method:
Order Page Address Data Procedure
1 Close the cassette compartment
without inserting a cassette.
2 0 01 01 Set the data.
3 9 74 01 Set the data, and press PAUSE
button.
4 9 81 01 Set the data, and press PAUSE
button.
5 2 00 29 Set the data.
6 2 01 29 Set the data, and press PAUSE
button.
7 0 01 01 Set the data.
8 Enter the play back mode
without a cassette.
9 3 00 0F Set the data, and press PAUSE
button.
10 3 01 Check that the data changes to
“00”.
If the data changes to “FF”,
there are errors (Time-out).
11 Enter the STOP mode.
12 9 74 00 Set the data, and press PAUSE
button.
13 9 81 00 Set the data, and press PAUSE
button.
14 0 01 00 Set the data.
15 Turn off the power and turn on
again.