88
Warning indicators and messages
If a code starting with a letter of the
alphabet appears, your camera has a self-
diagnosis display. The last two digits
(indicated by
ss
) will differ depending on
the state of the camera.
If you are unable to solve the problem even
after trying the following corrective actions
a few times, contact your Sony dealer or
local authorized Sony service facility.
C:32:
ss
•
There is trouble with your camera's
hardware. Turn the power off and on
again.
C:13:
ss
•
The camera cannot read or write data.
Turn off and on the power or re-insert
the “Memory Stick” several times.
•
Format error has occurred in the internal
memory or an unformatted “Memory
Stick” is inserted. Format the media
(pages 50, 51).
•
The inserted “Memory Stick” cannot be
used with your camera, or the data is
damaged. Insert a new “Memory Stick”
(page 91).
E:61:
ss
E:91:
ss
E:92:
ss
•
A camera malfunction has occurred.
Initialize the camera (page 53), then
turn the power on again.
If the following messages appear, follow
the instructions.
Turn the power off and on again
•
A problem with the lens has caused an
error.
E
•
The battery level is low. Charge the
batteries (
t
step 1 in
“Read This
First”
). Depending on the conditions of
use or the type of battery, the indicator
may flash even though there are still 5
to 10 minutes of remaining battery time
left.
System error
•
Turn the power off and then on again
(
t
step 2
“Read This First”
).
Internal memory error
•
Turn the power off and then on again
(
t
step 2
“Read This First”
).
Memory Stick error
•
Insert the “Memory Stick” correctly.
•
The inserted “Memory Stick” cannot be
used in your camera (page 91).
•
The “Memory Stick” is damaged.
•
The terminal section of the “Memory
Stick” is dirty.
Memory Stick type error
•
The inserted “Memory Stick” cannot be
used in your camera (page 91).
Format error
•
Format the media again (pages 50, 51).
Self-diagnosis display
Messages
