86
Printing is canceled.
•
You disconnected the cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station
(DSC-ST80) before the
(Do not disconnect the cable for multi-use terminal/the USB
cable) mark disappears.
Cannot insert the date or print images in the index mode.
•
The printer does not provide these functions. Consult the printer manufacturer as to whether
the printer provides these functions or not.
•
The date may not be inserted in the index mode depending on the printer. Consult the printer
manufacturer.
“---- -- --” is printed on the date-inserted part of the image.
•
Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
to [Off] and print the image again (page 72).
Cannot select the print size.
•
Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
•
Disconnect the cable for multi-use terminal (DSC-S90/S80/S60) or Cyber-shot Station (DSC-
ST80) and reconnect it whenever you change the paper size after the printer has been
connected to the camera.
•
The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 72) or the printer.
Cannot operate the camera after canceling printing.
•
Wait for a while as the printer is carrying out the cancellation. It may take some time
depending on the printer.
Your camera does not work.
•
Use the type of batteries you can use with this camera (page 93).
•
The battery level is low (The
E
indicator appears). Charge the batteries or replace with new
ones (
t
step 1 in
“Read This First”
).
The power is on, but the camera does not work.
•
The built-in microcomputer is not working properly. Remove the batteries, and then, after one
minute, insert the batteries and turn on the camera.
Cannot identify an indicator on the screen.
•
See page 17.
Others
