11
AVN-PA8/T/D 5
relay contact. This has the following pinout.
Pin 1:
GPIO Port 1
Pin 2:
GPIO Port 2
Pin 3:
GPIO Port 3
Pin 4:
GPIO Port 4
Pin 5:
GPIO Port 5
Pin 6:
Relay – Normally Open Contact
Pin 7:
Relay – Normally Closed Contact
Pin 8:
Relay – Common
Pin 9:
GPIO Port 6
Pin 10: GPIO Port 7
Pin 11: GPIO Port 8
Pin 12: GPIO Port 9
Pin 13: GPIO Port 10
Pin 14: Fused (200mA) +12VDC Supply
Pin 15: Ground
The +12V supply is fused and has a maximum output current of 200mA.
GPIO ports can be set up as GPO or GPI. GPO are open collector, this means
the output pin is connected to ground when the GPO is active. GPI are
active low this means they are triggered when pulled down to ground. GPIO
configuration can be managed through the embedded web server.
AVN-PA8T/AVN-PA8TD 24-Pin Phoenix Style Stereo Line Input/
Output Terminal Connections, AES67 Portal
24-Pin Phoenix Style Stereo Line Input Terminal Connections
The AVN-PA8T and AVN-PA8TD have 2 female 24-pin Phoenix style terminal
blocks used as analogue stereo line inputs. This has the following pinout.
L – Left
R – Right
Block 1
Pin 1:
Channel 1L ground
Pin 2:
Channel 1L + (Phase)
Pin 3:
Channel 1L - (Non-phase)
Pin 4:
Channel 1R ground
Pin 5:
Channel 1R + (Phase)
Pin 6:
Channel 1R - (Non-phase)
Pin 7:
Channel 2L ground
Pin 8:
Channel 2L + (Phase)
Pin 9:
Channel 2L – (Non-phase)
Pin 10: Channel 2R ground
Pin 11: Channel 2R + (Phase)
Pin 12: Channel 2R – (Non-phase)
Fig 5-2: AVN-PA8T/AVN-PA8TD Rear Panel
Ethernet 1 Gb
Female RJ45
AoIP 1Gb
Female RJ45
SFP
Port
12V DC
Input
Mains
Fuse
Mains AC
Input
24-Pin Phoenix Style Stereo Line
Input Terminal Connections
24-Pin Phoenix Style Stereo Line
Output Terminal Connections
24-Pin Phoenix Style GPIO
Terminal Connection