38
8 Embedded Web Server
Fig 8-16: ‘AoIP’ Tab of ‘Add New AoIP Input Stream’ Window, with Manual Entry
Checkbox Selected
If a particular AoIP stream is not discoverable via SAP or Avahi/Bonjour
then it is possible to add the SDP manually by selecting the “Manual Entry”
checkbox. When selected, the user can enter a custom “Stream Name” and
an SDP for the custom stream.
As with the discovered streams, a “Buffer delay” can be set before clicking
the Add button to add the stream to the grid.
Fig 8-17: ‘General’ Tab of the ‘Add New AoIP Input Stream’ Window
In the ‘General’ tab the value in the ‘Stream Name’ field of the stream you
have selected in the ‘AoIP’ tab is displayed in the ‘Name’ text field. The Trim
level of the stream can also be modified by using the ‘+’ and ‘-’ buttons or
typing a value in the text field of the ‘Trim’ section, the increase or decrease
in the level of the stream is measured in ‘dB’ and can be any whole number
from -12 to +12. If the trim is adjusted an icon will be shown next to the
name of the stream in the grid ( or ) depending on the trim level set).
A stream can be muted by selecting the ‘Mute’ checkbox before adding it,
this is useful if you want to pre-configure a streams routing. If a stream is
muted, a icon will be shown next to the stream name in the grid.
